Tuesday, March 21, 2017
Lexia 3 PSA Diagbox v8 38 Download in Mega
Lexia 3 PSA Diagbox v8 38 Download in Mega
Here is a user share of Lexia Diagbox v8.38 and earlier versions to diagbox v8.17, intended for personal, educational and experimental use.
Diyobd2 & the contributor @Simple hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.
DiagBoxdownload:
DiagBox APP folder (Lexia nad PP2000) update from 8.17 to 8.37APP_Update_817-837.exe 75.2 MB
Password = Simple
https://mega.nz/#!Z0EHmRwB!T4QsYzZxrNiatSoRlacjCw7oghPpb0H200MO03BM2jg DiagBox APP folder (Lexia nad PP2000) update from 8.35 to 8.37APP_Update_835-837.exe 10.2 MB
Password = Simple
https://mega.nz/#!F0dCSbLA!Aqr6lKJy2rQlkK0_8kBLCVMJKo_6IaJjWmPMPu0fkBkIncludes updates 8.37 + 8.38 for installations with 8.35 or higher. It will update Lexia and PP2000 to v500.74 & v600.80 respectively.APP_Update_835-838.exe 39.4 MB
Password = Simple
https://mega.nz/#!V8VS1Yib!p3MCZCzs8j7ruts2gAJtUPsJTflRIlTr8ZiXNKhTj1cNote: about diagbox security
all diagbox above is not tested yet so that users use them with unknown security;
For sake of security, kind of old Diagbox versions are advised:
Diagbox v7.76 -100% working
http://www.diyobd2.fr/wholesale/diagbox-v601-software-for-lexia-3-pp2000-peugeot-citroen-diagnostic-tool-1755.html
PSA diagbox v7.57- tested by thousands of users, 100% safe
http://www.diyobd2.fr/wholesale/diagbox-v724-software-for-lexia-3-pp2000-peugeot-citroen-diagnostic-tool.html
Note: about diagbox download
I present 2 compilations "APP_Update_817-837.EXE" and "APP_Update_835-837.EXE" (links in the attachment). Those executables are intended to update Lexia 3 and PP2000 from version 8.17+ or 8.35 respectively, to the latest 8.37 and will bring Lexia v500.74 and PP2000 v600.79 to latest fixes or support level.
APP_Update_817-837.EXE update should be attempted if you have a working DiagBox v8.17 / v7.81 installation or higher, or if you have a working "APP-835.7z" implementation.
APP_Update_835-837.EXE update should be attempted if you have a working "APP-835.7z" implementation.
APP_Update_835-838.EXE should be attempted if you have a working "APP-835.7z" implementation or APP-8.37 upgrade. It will update Lexia and PP2000 to versions 500.74 and 600.80 respectively, with latest fixes and support level.
Procedure:
1- Ensure you have a backup copy of the file "C:AWRoot infiAPPDIAG.SYS" before you start.
2- Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all associated processes to enable overwriting without conflicts.
3- Run DiagBox to start the update process and wait until DiagBox is operational. Close DiagBox and restart your computer to ensure all processes are running.
Done..! you may run DiagBox software as usual..
Have fun!
Lexia language is set to English and PP2000 to french, if you wish to change them, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace "GB" with "FR" or vise versa.
P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.
I present 2 compilations "APP_Update_817-837.EXE" and "APP_Update_835-837.EXE" (links in the attachment). Those executables are intended to update Lexia 3 and PP2000 from version 8.17+ or 8.35 respectively, to the latest 8.37 and will bring Lexia v500.74 and PP2000 v600.79 to latest fixes or support level.
APP_Update_817-837.EXE update should be attempted if you have a working DiagBox v8.17 / v7.81 installation or higher, or if you have a working "APP-835.7z" implementation.
APP_Update_835-837.EXE update should be attempted if you have a working "APP-835.7z" implementation.
APP_Update_835-838.EXE should be attempted if you have a working "APP-835.7z" implementation or APP-8.37 upgrade. It will update Lexia and PP2000 to versions 500.74 and 600.80 respectively, with latest fixes and support level.
Procedure:
1- Ensure you have a backup copy of the file "C:AWRoot infiAPPDIAG.SYS" before you start.
2- Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all associated processes to enable overwriting without conflicts.
3- Run DiagBox to start the update process and wait until DiagBox is operational. Close DiagBox and restart your computer to ensure all processes are running.
Done..! you may run DiagBox software as usual..
Have fun!
Lexia language is set to English and PP2000 to french, if you wish to change them, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace "GB" with "FR" or vise versa.
P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.
BIG THANKS to Simple.
It is from lexia3 pp2000 technical support:Lexia 3 PSA Diagbox v8.38 Download in Mega
Available link for download
